A tool does one sum. Solar Base does the whole job.
The STC count, the NMI, the meter alteration and the invoice, worked off one job record, with the last step left to you.
Certificates a home battery creates under the Cheaper Home Batteries Program, with the factor and the capacity tiers for when it goes in.
Usable capacity × the factor for the period the battery is installed in, rounded down. From 1 May 2026 the factor applies in full to the first 14 kWh, at 60% from 14 to 28 kWh and at 15% from 28 to 50 kWh, and nothing above 50 kWh counts: 6.8 × 13.5 = 91.80
Factors and tiers: Renewable Energy Legislation (2026 Measures No. 1) Amendment Regulations 2026 and the Clean Energy Regulator's Cheaper Home Batteries pages. Checked 21 October 2026. An estimate: the REC Registry decides the final count.
A home battery creates small-scale technology certificates under the Cheaper Home Batteries Program. The count is its usable capacity times a factor that steps down every six months until the scheme ends in 2030.
Since 1 May 2026 the factor is applied in tiers, so the first 14 kWh earn the most. For those batteries the date that counts is when the installation is certified safe and lawful, which is usually the date on the certificate of electrical safety. The Regulator's own line is that the rebate is set by the installation date, not the date the contract was signed.
Batteries with a nominal capacity of 5 to 100 kWh that meet the program's product and installation rules, and that are technically able to join a virtual power plant if the site is grid connected. Certificates are only created on the first 50 kWh of usable capacity.
The program counts usable capacity, which is less than the nominal figure on the box. Take it from the spec sheet.
Yes, separately. Work out the solar's with the STC calculator.
Twelve months from the installation date, in the REC Registry, as for solar.
The STC count, the NMI, the meter alteration and the invoice, worked off one job record, with the last step left to you.